- Product Reviews
SprayMax 3680036, 2K Urethane Filler Primer, Medium Gray
This product has been discontinued by the manufacturer.
SprayMax 2K Urethane Filler Primer is a medium gray urethane primer in an Aerosol can. It has excellent filling and sanding characteristics unlike many other spray-can primers on the market today. This 2K Urethane Filler Primer can be applied wet-on-wet and is super easy to spray giving a spray-gun like result every time. The nozzle can be rotated to spray vertical or horizontal spray pattern and also has a built in flow adjustment right on the nozzle itself.
Contrary to conventional paint aerosols, SprayMax uses an innovative nozzle technology in combination with a new propellent technology. SprayMax has more yield, faster workspeed, and a broader spray pattern than most conventional aerosols. The results, professional paint results like a spraygun, but without the disadvantages: no paint mixing, no cleaning of the spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!
Safety Notes: This product contains a chemical known as isocyanate. When spraying Individuals with lung or breathing problems or prior reactions to isocyanates must not be exposed to vapor or spray mist. We recommend using proper lung protection and spraying in a well ventilated area.
Salesman Notes: 2K SprayMax 2K Urethane Primer Filler works much like a conventional spraygun. It has high transfer efficiency, and great atomization. The primer has excellent sanding characteristics after drying about 4 hours.
How to Use: First shake for 2 minutes vigorously before activating.
To Activate: Simple take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the red button firmly and press the pin into the can. Shake again for two minutes to ensure activator is thoroughly mixed with the 2K Urethane Primer. After activated this product will last approx. 24 hours.
Product Characteristics: SprayMax 2K Urethane Primer Filler has excellent adhesion to properly cleaned and sanded OEM finishes, primer, and fiberglass.
Preparation: Apply 2-3 coats of 2K Urethane Primer for rough areas. Allow 20-30 minutes between coats. Allow 2K Urethane Primer at least 3-4 hours dry time prior to sanding.