- Product Reviews
SprayMax 1 Part Filler Primer - Red Brown
This is a 1 part filler primer, red/brown in color. SprayMax 1 part filler primer is weldable and provides excellent adhesion and corrosion protection to bare metal ( properly prepared steel, aluminum, and stainless steel). This protection also applies to welded surfaces when the recommended application procedure is followed.
Salesman Notes: SprayMax Aerosols work much like a conventional spraygun. It has high transfer efficiency, and great atomization.
How to Use: First, shake can vigorously before using. Usually about 3-5 minutes and about 15 seconds every couple of minutes while in use.
As a Weld-Thru Coating: SprayMax Red/Brown primer has excellent adhesion and anticorrosion properties. Red/Brown primer reduces Anti-Spatter, with no drag. This product doesn't burn away from the sides of the weld. Can be used on Zinc-Coated Steel, Anodized Aluminum, Hot-rolled or Cold rolled Steel, and many other surfaces.
Preparation: Properly clean and sand surfaces to be primed. Use a good quality grease and wax remover to prep the surface before priming. Apply 1-2 coats of product to each mating surface. Allow 2-3 minutes between coats. Coating should be dry to touch before parts can be MIG welded.