On Sale Products in Stores

2 Part (2K), Aerosol, Epoxy Rust-Cure Primer - $ 17.40

2 Part (2K), Aerosol, Epoxy Rust-Cure Primer

PRICE :$ 17.40
$ 19.99
SAVE $ 2.59

This is an Epoxy Rust-Cure Primer. It primes and fills in one shot. Contrary to conventional paint aerosols SprayMax convinces by an innovative nozzle technology in combination with a new propellent technology. SprayMax has more yield, faster workspeed, broader spray pattern than conventional aerosols. The result: professional paint results like a spraygun, but without the disadvantages: no paint mixing, no cleaning of spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!

Salesman Notes: SprayMax Aerosols work much like a conventional spraygun. It has high transfer efficiency, and great atomization.

How to Use: First shake for 2 minutes vigorously before activating.

To activate simple take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the button firmly. Shake again for two minutes to ensure activator is thoroughly mix with primer. After activated this product will last approx. 4 days.

Product Characteristics: SprayMax Epoxy primer has excellent adhesion and anticorrosion properties. Can be used on Zinc-Coated Steel, Anodized Aluminum, Hot-rolled or Cold rolled Steel, Fiberglass, and many other surfaces.

Preparation: Properly clean and sand surfaces to be primed. Use a good quality grease and wax remover before priming. Apply 2-3 coats of product. Allow 5-10 minutes between coats. After drying approximately 12 hours dry time lightly sand surface before recoating with topcoat or another primer.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SprayMax, 2 Part, 2K Urethane Filler Primer, Medium Gray - $ 19.99

SprayMax, 2 Part, 2K Urethane Filler Primer, Medium Gray

PRICE :$ 19.99
$ 26.99
SAVE $ 7.00

SprayMax 3680036, 2 Part, 2K Urethane Filler Primer, Medium Gray

SprayMax 2K Urethane Filler Primer is a medium gray urethane primer in an Aerosol can. It has excellent filling and sanding characteristics unlike many other spray-can primers on the market today. This 2K Urethane Filler Primer can be applied wet-on-wet and is super easy to spray giving spray-gun like results every time. The nozzle can be inverted to spray vertical or horizontal spray pattern and also has a built in flow adjustment right on the nozzle itself.

Contrary to conventional paint aerosols SprayMax uses an innovative nozzle technology in combination with a new propellent technology. SprayMax has more yield, faster workspeed, broader spray pattern than most conventional aerosols. The result: professional paint results like a spraygun, but without the disadvantages: no paint mixing, no cleaning of the spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!

Salesman Notes: 2K SprayMax 2K Urethane Primer Filler works much like a conventional spraygun. It has high transfer efficiency, and great atomization.

How to Use: First shake for 2 minutes vigorously before activating.

To activate: Simple take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the red button firmly and press the pin into the can. Shake again for two minutes to ensure activator is thoroughly mix with clear coat. After activated this product will last approx. 24 hours.

Product Characteristics: SprayMax 2K Urethane Primer Filler has excellent adhesion to properly cleaned and sanded OEM finishes, primer, and fiberglass.

Preparation: Apply 2-3 coats of 2K Urethane Primer for rough areas. Allow 20-30 minutes between coats. Allow 2K Urethane Primer at least 3-4 hours dry time prior to sanding.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

2 Part, Aerosol, Rapid Primer Filler, Non Isocyanate - $ 18.99

2 Part, Aerosol, Rapid Primer Filler, Non Isocyanate

PRICE :$ 18.99
$ 21.99
SAVE $ 3.00

This is an Rapid Primer Filler. It primes and fills in one shot. Contrary to conventional paint aerosols SprayMax convinces by an innovative nozzle technology in combination with a new propellent technology. SprayMax has more yield, faster workspeed, broader spray pattern than conventional aerosols. The result: professional paint results like a spraygun, but without the disadvantages: no paint mixing, no cleaning of spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!

Salesman Notes: SprayMax Aerosols work much like a conventional spraygun. It has high transfer efficiency, and great atomization.

How to Use: First shake for 2 minutes vigorously before activating.

Product Characteristics: SprayMax Rapid Primer Filler is a high class two component filler primer for professional priming of small and average size areas and parts coating and spot repair. Universally applicable on sanded existing coats, metallic and zinc/coated surfaces. Overcoatable with any 1K and 2K topcoat systems.

Preparation: Properly clean and sand surfaces to be primed. Use a good quality grease and wax remover before priming. Apply 2-3 coats of product. Allow 5-10 minutes between coats. After drying approximately 1 hour product can be sanded and coated with most topcoat systems.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

Solar CS1100, Jump Starter Battery Pack - $ 39.99

Solar CS1100, Jump Starter Battery Pack

PRICE :$ 39.99
$ 49.95
SAVE $ 9.96

Solar CS1100, Jump Starter Battery Pack

12 Volt
900 Peak Amp
225 Cranking Amps
Ultra Portable
27" Cable Reach
Full Size clamps penetrate corrosion on battery terminals
Integrated Flashlight is ideal for emergency use
Compact Size is perfect for storing in your vehicle.

Salesman Notes: The Solar CS1100 Jump Starter Battery Pack would be perfect for charging or powering your laptop, cell phone, or just about any other hand held device that uses a cigarette lighter adapter to plug in with.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

AES 51750, White, The Edge, Foam Pad, - $ 5.99

AES 51750, White, The Edge, Foam Pad,

PRICE :$ 5.99
$ 14.75
SAVE $ 8.76

AES 51750, The Edge, Foam Pad, White

The White Edge Pad (AES 51750) is a soft pad used for ultra smooth polishing. Provides a bold crystalline gloss finish. The Edge Pads is the only foam pads with a tapered edge to fit into cracks, crevices, and molding edges to eliminate hand finishing.

Salesman Note: The Edge Polishing Pads work great. The patented Edge works great for removing polishes and compounds from doors and hood gaps where most polishing pads leave residue behind. Cuts cleanup time drastically.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

AES 51740, Blue, The Edge, Foam Polishing Pad - $ 5.99

AES 51740, Blue, The Edge, Foam Polishing Pad

PRICE :$ 5.99
$ 11.70
SAVE $ 5.71
The Blue Edge Pad (AES 51740) is a soft pad used for the final step in waxing and polishing clear coat surfaces. Provides the highest gloss finish. The Edge is the only foam pads with a tapered edge to fit into cracks, crevices, and molding edges to eliminate hand finishing.

Salesman Note: The Edge Polishing Pads work great. The patented Edge works great for removing polishes and compounds from doors and hood gaps where most polishing pads leave residue behind. Cuts cleanup time drastically.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

AES 51730, Black, The Edge, Foam Polishing Pad - $ 5.99

AES 51730, Black, The Edge, Foam Polishing Pad

PRICE :$ 5.99
$ 11.70
SAVE $ 5.71

The Black Edge Pad (AES 51730) is a coarse cutting foam pad used for the first step in compounding painted surfaces. The Edge is the only foam pads with a tapered edge to fit into cracks, crevices, and molding edges to eliminate hand finishing.

Salesman Note: The Edge Polishing Pads work great. The patented Edge works great for removing polishes and compounds from doors and hood gaps where most polishing pads leave residue behind. Cuts cleanup time drastically.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

AES 51735, Yellow, The Edge, Foam Polishing Pad - $ 5.99

AES 51735, Yellow, The Edge, Foam Polishing Pad

PRICE :$ 5.99
$ 11.70
SAVE $ 5.71

The Yellow Edge Pad (AES 51735) is a medium coarse cutting pad used in the compounding step for basecoat clear coats finishes and single stage finishes. The Edge is the only foam pads with a tapered edge to fit into cracks, crevices, and molding edges to eliminate hand finishing.

Salesman Note: The Edge Polishing Pads work great. The patented Edge works great for removing polishes and compounds from doors and hood gaps where most polishing pads leave residue behind. Cuts cleanup time drastically.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

Al's Liner, Bed Liner, Spray on Bed Liner - $ 98.10

Al's Liner, Bed Liner, Spray on Bed Liner

	PRICE :$ 98.10 $ 109.00 SAVE $ 10.90 Al's Liner, Bed Liner, Spray on Bed Liner What makes Al's Liner Bed Liner unique is the ability to protect all of your projects not only from everyday wear and tear, but it also gives you protection from the sun. Al's liner easy to apply spray on bed liner that is 100% UV resistant. Your beautiful Do It Yourself spray on bed liner coating will not fade, no matter what color you spray. Features and Benefits: Chip Resistant Scratch and Tear Resistant A 40 mil (less than 1/16th of an inch) build will remain permanantly rubbery. Spray in any color. Achieve a wide variety of textures. Sprays in 4 easy steps Minimal personal protection required. You don't need a spray booth. 100% U.V. Resistant which means absolutely no fading. Tintable to any color. Super Fast Curing (Rough Duty Use in just 72 hours) Easy, Do It Yourself Bedliner Q) How does Al's Liner compare to the big name, franchise liners? A)With a few exceptions, Al's Liner represents a new generation of polyurethane linings. Most of the big name franchise liners use very old and out of date technologies. Al's Liner is more UV stable and tougher than Rhino, Line X and blows the doors off the liners like Reflex, Armorthane, etc. Since you control the application it's very probable that no one, not even the pros, can match your Al's Liner durability and U.V. resistance. Click for more FAQ's on Al's Liner Bed Liner Coatings. Salesman Notes: Al's Liner is absolutely the best Do It Yourself Spray on Bed Liner coating on the market today. Al's Liner rivals high quality brands such as Rhino Lining, Line X, Armorthane, and Reflex but at a price you can afford and best of all you can do it yourself with minimal amount of equipment. Another great feature of Al's Liner is that it stays permenently rubbery and will not fade out after extended exposure to the sun. Order yours today to completely protect your truck bed. (To quickly prep the surface to be coated look into a Nylon Filament Cup Brush such as the AL 6CB or AL4CB.)
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

Al's Liner 5702, Tan Spray On Bed Liner - $ 98.10

Al's Liner 5702, Tan Spray On Bed Liner

PRICE :$ 98.10
$ 109.00
SAVE $ 10.90

Al's Liner 5702, Tan Spray On Bed Liner

Check Out Our New Al's Liner Bed Liner Color Selector Page!!

What makes Al's Liner Spray On Bed Liner unique is the ability to protect all of your projects not only from everyday wear and tear, but it also gives you protection from the sun. Al's liner easy to apply spray on Bed Liner that is 100% UV resistant. Your beautiful Do It Yourself spray on bed liner coating will not fade, no matter what color you spray.

Al's Liner Benefits:

Chip, Scratch, and Tear Resistant
A 40 mil (less than 1/16th of an inch) build will remain permanantly rubbery.
Color Tintable design allows you to spray in any color.
Achieve a wide variety of textures.
Sprays in 4 easy steps
Minimal personal protection required.
You don't need a spray booth.
100% U.V. Resistant which means absolutely no fading.
Super Fast Curing (Rough Duty Use in just 72 hours)
Easy, Do It Yourself Bedliner

Salesman Notes: Al's Liner is absolutely the best Do It Yourself Spray on Truck Bed Liner coating on the market today. Al's Liner rivals high quality brands such as Rhino Lining, Line X, Armorthane, and Reflex but at a price you can afford and best of all you can do it yourself with minimal amount of equipment. Another great feature of Al's Liner is that it stays permanently rubbery and will not fade out after extended exposure to the sun. Order yours today to completely protect your truck bed.

(To quickly prep the surface to be coated look into a Nylon Filament Cup Brush such as the AL 6CB or AL4CB.)

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS