2 Part (2K), SprayMax Urethane Aerosol Clear Coat - USD 17.40

2 Part (2K), SprayMax Urethane Aerosol Clear Coat

PRICE :USD 17.40

2 Part (2K), SprayMax Urethane Aerosol Clear Coat

SprayMax now offers a 2 part (2K) Urethane Aerosol Clear Coat. It has a much higher weather and U.V. resistance than all standard aerosol clear coats on the market today. Contrary to conventional paint aerosols SprayMax uses an innovative nozzle technology in combination with a new propellent technology. SprayMax offers more yield, a faster workspeed, and a broader spray pattern than most conventional aerosols.

SprayMax 2K Urethane Clear Coat Benefits:

Professional paint results like a spray-gun
No paint mixing
No cleaning of the spray-gun
No solvent for cleaning
No compressor
Less overspray

Salesman Notes: 2K SprayMax Urethane Aerosol Clear Coat works much like a conventional spraygun. It has high transfer efficiency, and great atomization.

How to Use: First shake for 2 minutes vigorously before activating.

To activate: Simple take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the red button firmly and press the pin into the can. Shake again for two minutes to ensure activator is thoroughly mix with clear coat. After activated this product will last approx. 24 hours.

Product Characteristics: SprayMax 2 part Aerosol Clear Coat has excellent adhesion to basecoat and cured lacquer and enamel finishes .

Preparation: Allow basecoat paints at least 30 minutes dry time prior to using the 2K SprayMax Urethane Aerosol Clear Coat. Apply 2-3 coats of aerosol clear coat. Allow 5-10 minutes between coats. After allowing approximately 24 hours dry time, It may been polished by hand or machine.

Technical Data Sheet

Application Guide

Need more than an Aerosol can? Try USC 10-1 Universal Urethane Clear Coat Kit.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

2 Part (2K), Aerosol, Epoxy Rust-Cure Primer - USD 19.99

2 Part (2K), Aerosol, Epoxy Rust-Cure Primer

PRICE :USD 19.99

This is an Epoxy Rust-Cure Primer. It primes and fills in one shot. Contrary to conventional paint aerosols SprayMax convinces by an innovative nozzle technology in combination with a new propellent technology. SprayMax has more yield, faster workspeed, broader spray pattern than conventional aerosols. The result: professional paint results like a spraygun, but without the disadvantages: no paint mixing, no cleaning of spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!

Salesman Notes: SprayMax Aerosols work much like a conventional spraygun. It has high transfer efficiency, and great atomization.

How to Use: First shake for 2 minutes vigorously before activating.

To activate simple take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the button firmly. Shake again for two minutes to ensure activator is thoroughly mix with primer. After activated this product will last approx. 4 days.

Product Characteristics: SprayMax Epoxy primer has excellent adhesion and anticorrosion properties. Can be used on Zinc-Coated Steel, Anodized Aluminum, Hot-rolled or Cold rolled Steel, Fiberglass, and many other surfaces.

Preparation: Properly clean and sand surfaces to be primed. Use a good quality grease and wax remover before priming. Apply 2-3 coats of product. Allow 5-10 minutes between coats. After drying approximately 12 hours dry time lightly sand surface before recoating with topcoat or another primer.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SprayMax Handle, Fits Aerosol Cans - USD 6.95

SprayMax Handle, Fits Aerosol Cans

PRICE :USD 6.95

SprayMax Handle, Fits Aerosol Cans

The SprayMax aerosol can handle fits SprayMax aerosol cans turning it into a handy spraygun which relieves finger fatigue and allows for more control.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SprayMax, 2 Part, 2K Urethane Filler Primer, Medium Gray - USD 26.99

SprayMax, 2 Part, 2K Urethane Filler Primer, Medium Gray

PRICE :USD 26.99

SprayMax 3680036, 2 Part, 2K Urethane Filler Primer, Medium Gray

SprayMax 2K Urethane Filler Primer is a medium gray urethane primer in an Aerosol can. It has excellent filling and sanding characteristics unlike many other spray-can primers on the market today. This 2K Urethane Filler Primer can be applied wet-on-wet and is super easy to spray giving spray-gun like results every time. The nozzle can be inverted to spray vertical or horizontal spray pattern and also has a built in flow adjustment right on the nozzle itself.

Contrary to conventional paint aerosols SprayMax uses an innovative nozzle technology in combination with a new propellent technology. SprayMax has more yield, faster workspeed, broader spray pattern than most conventional aerosols. The result: professional paint results like a spraygun, but without the disadvantages: no paint mixing, no cleaning of the spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!

Salesman Notes: 2K SprayMax 2K Urethane Primer Filler works much like a conventional spraygun. It has high transfer efficiency, and great atomization.

How to Use: First shake for 2 minutes vigorously before activating.

Product Characteristics: SprayMax 2K Urethane Primer Filler has excellent adhesion to properly cleaned and sanded OEM finishes, primer, and fiberglass.

Preparation: Apply 2-3 coats of 2K Urethane Primer for rough areas. Allow 20-30 minutes between coats. Allow 2K Urethane Primer at least 3-4 hours dry time prior to sanding.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

Most Popular Products in * Coatings & Accessories

2 Part (2K), SprayMax Urethane Aerosol Clear Coat - USD 17.40

2 Part (2K), SprayMax Urethane Aerosol Clear Coat

SprayMax 2K Urethane Clear Coat Benefits:

2 Part (2K), Aerosol, Epoxy Rust-Cure Primer - USD 19.99

SprayMax Handle, Fits Aerosol Cans - USD 6.95

SprayMax Handle, Fits Aerosol Cans

SprayMax, 2 Part, 2K Urethane Filler Primer, Medium Gray - USD 26.99

SprayMax 3680036, 2 Part, 2K Urethane Filler Primer, Medium Gray