Kleanstrip EFS459 Peeler Paint Remover

Instructions for Using Peeler:

1. Shake well before using Peeler Paint Remover.
2. Cover all painted surfaces not intended to be stripped to prevent paint remover from damaging the paint surface.
3. Spray Peeler while holding can in an upright position pointing the arrow on the spray nozzle away from you at a distance of 8-12 inches from the surface. Use a back and forth motion and apply a light even coat.
4. Allow Peeler to work for approximately 1-5 minutes or until the finish has had suffiecient time to blister or bubble.
5. Blow paint and paint remover off the vehicle immediately by blowing off with shop air. (Residue can also be removed with a flexible plastic scraper.)
6. Wash the area to be repainted with a good quality degreaser and prime or paint according to paint manufacturer's specification.

Salesman Note: Excellent for cleaning dried paint on your spraygun.