General: Use to thin colors for improved flow, leveling and spray-ability with an acceleration in
drying time. For airbrush usage, 4011 Flash Reducer aids with control and preventing over-spray
when using smaller tip sizes at lower PSI settings for cleaner lines for detailed work.

Mix Ratio: Spray Gun 10% - Airbrush 10-25% per volume

Viscosity: 23 - 26 second Zahn #2 cup at 4:1, Reducing colors past 25% per volume with 4011
Flash Reducer will not further decrease viscosity. If further reduction is made, use 4003
Binder-Reducer to balance color?s resin level. Over-reducing colors with 4011 Flash Reducer past
25% per volume will weaken color's adhesive properties.

Pot life: 24 hours - once mixed with Auto Air Colors. Mix 4011 Flash Reducer only into color
amounts for current use.

Curing: Use forced, dry air to cure colors mixed with 4011 Flash Reducer. Heat may also be used
to decrease drying time. Colors may be air cured over a 4-12 hour period without the assistance
of air movement or heat. Curing times are dependant upon humidity, temperature and other
environmental conditions. Applying colors in light, even coats without excess material build-up
improves curing times.

Clearing: Colors mixed with 4011 Flash Reducer must be thoroughly dried prior to clearing to
prevent possible reaction with clear due to trapping in 4011 Reducer which has yet to flash.
Data contained herein are based on tests believed to be reliable and are not to be interpreted as being a warranty expressed or implied. No representation or warranty of freedom for legal liability, including patent liability resulting from the use of this product is made by Createx Distribution LLC. Copyright - 2006 Auto Air Colors / Createx Distribution LLC