General: Use to thin colors for improved flow, leveling and spray-ability with a slight acceleration
in drying time. For airbrush usage, 4010 Flash Reducer aids with control and preventing
over-spray when using smaller tip sizes at lower PSI settings for cleaner lines for detailed work.

Mix Ratio: Spray Gun 10% - Airbrush 10-25% per volume
Viscosity: 23-26 seconds Zahn #2 cup at 4:1, Reducing colors past 25% per volume with 4010
Flash Reducer will not further decrease viscosity. If further reduction is made, use 4003
Binder-Reducer to balance color's resin level. Over-reducing colors with 4010 Flash Reducer past
25% per volume will weaken color's adhesive properties.

Pot life: 24 hours - once mixed with Auto Air Colors. Mix 4010 Flash Reducer only into color
amounts for current use.

Curing: Use forced, dry air to cure colors mixed with 4010 Flash Reducer. Heat may also be used
to decrease drying time. Colors may be air cured over a 4-12 hour period without the assistance
of air movement or heat. Curing times are dependent upon humidity, temperature and other
environmental conditions. Applying colors in light, even coats without excess material build-up
improves curing times.

Clearing: Colors mixed with 4010 Flash Reducer must be thoroughly dried prior to clearing to
prevent possible reaction with clear due to trapping in 4010 Reducer which has yet to flash.