This is an Rapid Primer Filler.  It primes and fills in one shot.  Contrary to conventional paint aerosols SprayMax convinces by an innovative nozzle technology in combination with a new propellent technology. SprayMax has more yield, faster workspeed, broader spray pattern than conventional aerosols. The result: professional paint results like a spraygun, but without the disadvantages: no paint mixing, no cleaning of spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!

Salesman Notes:  SprayMax Aerosols work much like a conventional spraygun.  It has high transfer efficiency, and great atomization. 

How to Use:  First shake for 2 minutes vigorously before activating. 

To activate simple take the red button from the cap and attach it to the pin on the bottom of the can.  Put the top of the can on stable ground and push the button firmly.  Shake again for two minutes to ensure activator is thoroughly mix with primer.  After activated this product will last approx. 8 hours. 

Product Characteristics:  SprayMax Rapid Primer Filler  is a high class two component filler primer for professional priming of small and average size areas and parts coating and spot repair. Universally applicable on sanded existing coats, metallic and zinc/coated surfaces. Overcoatable with any 1K and 2K topcoat systems.

Preparation: Properly clean and sand surfaces to be primed.  Use a good quality grease and wax remover before priming.  Apply 2-3 coats of product.  Allow 5-10 minutes between coats.  After drying approximately 1 hour product can be sanded and coated with most topcoat systems.