This is an 2 part (2K) Urethane Aerosol Clear Coat. It has higher weather and U.V. resistance than most all aerosol clear coats on the market today. Contrary to conventional paint aerosols SprayMax uses an innovative nozzle technology in combination with a new propellent technology. SprayMax has more yield, faster workspeed, broader spray pattern than most conventional aerosols. The result: professional paint results like a spraygun, but without the disadvantages: no paint mixing, no cleaning of the spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented and only from KWASNY!
Salesman Notes: 2K SprayMax Urethane Aerosol Clear Coat works much like a conventional spraygun. It has high transfer efficiency, and great atomization.
How to Use: First shake for 2 minutes vigorously before activating.
To activate: Simple take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the red button firmly and press the pin into the can. Shake again for two minutes to ensure activator is thoroughly mix with clear coat. After activated this product will last approx. 24 hours.
Product Characteristics: SprayMax 2 part Aerosol Clear Coat has excellent adhesion to basecoat and cured lacquer and enamel finishes .
Preparation: Allow basecoat paints at least 30 minutes dry time prior to using the 2K SprayMax Urethane Aerosol Clear Coat. Apply 2-3 coats of aerosol clear coat. Allow 5-10 minutes between coats. After allowing approximately 24 hours dry time, It may been polished by hand or machine.
This product is insane to say the least. I have used all kinds of rattle can clear coats in the past, and they are not even in the same league as this product. I just did a custom paint job on my motorcylce with vinyl decals and everything and cleared over it with this product. I was not sure what to expect, but it looks amazing. I cleared over a black paint and it looks like a mirror no orange peel or anything. It shattered my expectations. I highly recommend this product, it is worth every penny!!!!
Part (2K), SprayMax Urethane Aerosol Clear Coat,
30 May 2009
Best clear coat system I have ever seen and used! I used it to paint ground effects for my car and it came out awesome. No wet sanding needed, beautiful finish first time. This system hardened onto the base coat like a rock after about 20 hrs. Anybody looking for professional results should not hesitate to grab SPRAY MAX. It saved me hundreds of dollars, and I think it looks better than the paint job on my brand new car. I will never use another brand again!
Painted motorcycle tank, Had three different kinds of paint. Enamel, lacquer, and vinyl decals. This clear is super!!It went on smooth, dried fast, no runs and looked wet and crystal clear after it dryed there was no need to wet sand or polish it worked flawless very impressed I will use it on all future projects. Im sold!!
I painted a whole 1991 corvette with a black basecoat from a spray can and then applied 4 coats of the spraymax clear out of the can. the basecoat went on super smooth and the spraymax clear went on fairly smooth in places. perhaps with more practice with these cans I could have achieved a better flow out with the spraymax but even so it came out very shiny. all I had to do to get a great finish after spraying was to wet sand with 2000 grit and then I polished it out with a highspeed buffer and the end result looked really good. looked like it had been sprayed at a shop but only after the wet sand and buffing. you may get better flow out than I did when spraying it and need no wet sanding. I would and am about to order some more of the spraymax clear coat.
