ORDERING

TRACK ORDER

ON SALE

Body Shop Supplies, 3M Automotive Products, Automotive Paint Supplies, Automotive Sprayguns, Airbrush, Auto Air Colors

2 Part (2K), SprayMax Urethane Aerosol Clear Coat
E-Z 10002, Clear View, Touch-Up Bottles
SEM M25053, Ranger Black, Marine Vinyl Paint
KleanStrip ETPO-123B, Bulldog Adhesion Promoter, 15 oz Aerosol
3M 08090, Super Trim Adhesive
U-POL 0763, High #5 White Primer Filler, Aerosol
3M 06396, 1 Packet, Automotive Adhesion Promoter Wipe
Als Liner 5701, Gray, Bed Liner
REPLACEMENT LENS FOR 1004 B
R&E Color Coats, Custom Matched Aerosol, Spraycan, 11 Ounce

For orders that exceed $175 & are under 30 lbs. Click For More Info.

>Manufacturers >Klean-Strip

KleanStrip QTP0123, Bulldog Adhesion Promoter, Quart

click to see larger image

Name:	KleanStrip QTP0123, Bulldog Adhesion Promoter, Quart



Your Price Per Unit:	$26.25

Manufacturer Name:	Kleanstrip




Tweet

Quantity To Order

Customers who bought this item also bought
FE 359, Blue Cream Hardener
FE 407, Polyester Glazing Putty

Description

KleanStrip QTP0123, Bulldog Adhesion Promoter, Quart

BULLDOG ADHESION PROMOTER

MAKES PAINT STICK

To all Automotive Surfaces

BULLDOG ADHESION PROMOTER is designed to promote paint adhesion to all automotive surfaces even problem plastics. Bulldog Adhesion Promoter works equally well on all flexible or rigid plastics, fiberglass, aluminum, glass, chrome, vinyl, galvanized metal, and painted surfaces. Bulldog acts as a tie coat by allowing several different surfaces to be painted at the same time to assure a smooth, flawless, durable finish every time.

To view a close up of the label click HERE

Click for MSDS

Salesman Note: Bulldog Adhesion Promoter is a quality product that aids in adhesion for many types of surfaces.

KleanStrip Bulldog Adhesion Promoter Directions:

For best results apply Bulldog Adhesion Promoter at a temperature above 60 degrees F and away from direct sunlight and strong breezes.

SURFACE PREPARATION:

For best results, first clean all areas to be painted with Klean-Strip PrepAll Wax & Grease Remover. Then, thoroughly clean with Bulldog Abrasive Cleaner. Rinse completely with water and let the part dry. When repairing peeling painted surfaces, all loose and peeling paint must be removed. To blend repaired areas with the original paint, sand the surface and the surrounding paint with 400 or finer grit sand paper until a smooth junction is attained. If the paint chips while sanding, it may be necessary to strip and repaint the entire part.

To Apply Bulldog Adhesion Promoter:

Directions: Using a spraygun, apply an even, light mist coat. Wait 3-5 minutes and apply a second coat. Wait 5-10 minutes before applying the next coating.

CLEANUP:
After each use of KleanStrip Bulldog Adhesion Promoter, All tools and spills should be cleaned immediately with lacquer thinner. Care should be taken to keep from exposing freshly painted surfaces to solvents.